1,000 Games/1000 Games.toast/Help⁄Tools/Edit II 202/Edit II Doc

Text File | 1992-05-14 | 16.6 KB | 833 lines | [TEXT/SNTE]

Edit II Version 2.0.2

© 1990-92 Kenneth Seah

Portions © by Symantec



An enhanced text editor for the Macintosh



0.    Prologue



This application is copyrighted by Kenneth Seah and is distributed as shareware. You are
welcome to try out Edit II for a week or two and if you decide that it's something you want to use,
send a check drawn on a US Bank or a draft for US$15 made out to me at the address below,
enclosing the little questionaire.  I'll answer your problems and consider bug fixes via
electronic mail (Internet, America OnLine or GEnie) if you are registered.



Otherwise, give a copy of it to a friend, enclosing this file too and trash your copy (since it takes
up valuable space on your disk).



I'll consider that you have been registered once you have sent in your shareware fee.  Upgrades
will be posted to America OnLine, GEnie and Internet.  I can work out a 'site licence' fee if you
need several copies installed at your place.



For commercial distribution and correspondence, please contact:



Kenneth Seah

P O Box 8565

Austin, TX 78713-8565



GEnie: K.SEAH

America OnLine: KSeah

Internet: [e-mail]



1.    Introduction



Edit II is intended as a replacement for the Consulair Edit text editor but which alllows the use
of the cursor keys on the Mac keyboard for navigation. Additionally, the num lock LED on the
extended keyboard is used to indicate whether the cursor pad or the numeric pad mode is on.  The
home, end, page up, page down keys will also work, as will the delete right (del) key.  One level
of undo is supported.  You can launch Edit II by double clicking old Edit files (since Edit II uses
the same creator signature as Edit, that is, EDIT). This means that you might want to rebuild the
desktop after installing Edit II.



Edit II requires System Software 4.1 or later and above and is Multifinder-friendly.  It is also
32-bit clean and runs fine under System 7.  Edit II now handles System 7 stationery documents.



This program is compiled using Think C 5.0.2 and uses the Capps’ Editor Toolkit.



2.    Menus



Edit II works just like Consulair's Edit.  Each of the menus and their respective commands are
described in the subsequent paragraphs.



File menu



New

    Creates a new window named 'Untitled-N' for editing.



Open...

    Displays the standard file open dialog box to allow the selection of a file to edit.  The dialog
box will display all files of type 'TEXT', 'RRRS' (Red Ryder script files) and 'ttro'
(TeachText read-only text files).  Stationery documents under System 7 will be opened as
'Untitled-N' windows.



Close

    Closes the frontmost editing window.  If the file has been changed in any way, the standard
file save dialog box will be displayed.



Save

    Saves the frontmost window to its file on disk.  If the file has not been previously saved,
perform a 'Save As...' operation.



Save As...

    Saves the frontmost window to a differently named file by presenting the standard file save
dialog box.



Revert

    Reverts the frontmost window to the most recently saved version of the file.  A prompt
message is displayed to confirm the action.



Page Setup...

    Displays the standard printer Page Setup dialog box.



Print

    Displays the standard printer Print dialog box to initiate printing of the frontmost
window.



Transfer

    Displays the standard file selection dialog box to choose an application program to run.



Quit

    Quits Edit II after prompting for saving of any changed windows.



Edit menu



Undo

    Reverts from the previous editing operation.



Cut

    Removes the currently selected text and copies it into the clipboard.



Copy

    Copies the currently selected text into the clipboard without deleting it.



Paste

    Pastes the clipboard text at the insertion point.  If a range has been selected, then the
pasted text will replace the selection.



Clear

    Deletes the currently selected text without copying it to the clipboard.



Select All

    Selects all the text in the frontmost window.



Search menu



Find...

    Displays the 'find and replace' dialog box for entry of search (Find) and replacement
(Replace with) strings.  GREP-style searching is available (see later on how to define
GREP search and replacement strings).  The 'find and replace' dialog box has several
options:



    'Match Words' will only flag a match if there is an exact word for word match with the
search string.



    'Wrap Around' will flag matches even when the words wrap over at the end of a line.



    'Ignore Case' will flag matches even when the cases (capitals and small letters) do not
match but the letters do.



    There is an option to do multi-file searches of all TEXT-type files inside a folder.  The
multi-file search is activated by clicking on the Multi-File Search checkbox which brings
up the standard file selection dialog box.  Selecting a TEXT-type file will initiate
multi-file searches of the search string for all TEXT-type files within the folder.  Note
that multi-file searching does not descend into subfolders (i.e. one folder level only).



    Cutting and pasting of text selections is allowed into the search and replacement strings in
the 'find and replace' dialog box.  This is achieved by using the command-C and command-V
combinations.  If you want to enter the tab or return characters in the Find dialog box, key
in command-tab and command-return respectively.



    Search and replacement strings are retained between searches.  The 'Don't Find' button
will retain the search and replacement string entries but will not initiate any searches.
The 'Cancel' button on the other hand, will ignore any entries made for these strings.



Enter Selection

    Puts the currently selected text into the search string.



Replace

    Replaces the currently selected text with the replacement string.



Replace and Find Again

    Replaces the currently selected text with the replacement string and searches for the next
occurrence of the search string.



Replace All...

    Replaces all occurences of the search string with the replacement string.  Prompts for
confirmed replacement if required.



Find in Next File

    Only operable under multi-file searches – will look for occurence of the search string in
the next file in the specified folder.



Go to Top

Go to Bottom

    Move the insertion point to the beginning or end of the file, respectively.



Go to Line#...

    Displays a dialog and moves to the specified line.



Goodies menu



Shift Left

Shift Right

    Moves the selected text one space to the left or right.



Balance

    Extends current selection to encompass the next level of enclosing braces {}, brackets []
or parentheses ().  A beep means that the text could not be balanced. [Great for C and Lisp
people!]



Add LFs

    Adds linefeed characters to the end of every line.



Strip LFs

    Removes linefeed characters from the text.



Wrap to Column...

    Wraps the text to a user-specified column.



Wrap to Window

    Wraps the text to the window width.



Unwrap

    Almost the reverse of the above wraps.  What Unwrap does is to replace all single
occurences of the 'return' character by a space and leave multiple runs of returns
untouched.  Thus a 'paragraph' is recognized as ending in two or more returns.

Remove Invisibles

    Removes all the invisible (non-printing) characters with the exceptions of tab, return
and linefeed.





Options menu



Font

Size

Creator

    Select the font, size and  creator for the file being edited.  The size submenu has 'Larger',
'Smaller' and 'Other...' commands to allow for selection of non-standard sizes.  The
creators supported by Edit II are:



EDIT    Consulair Edit (and Edit II)

MPS    Apple MPW

KAHL    Think C

PJMM    Think Pascal

ALFA    Alpha

MACA    MacWrite

MSWD    Microsoft Word

nX^n    WriteNow

ttxt    TeachText

PEDT    DA Edit or PEdit

WNGZ    WingZ

WPC2    WordPerfect

L123    Lotus 1-2-3

CIM    CompuServe Information Manager

MRIP    TScript

Rich    BBEdit



    Default font is Monaco, default size is 9 and default creator is EDIT.



Set Tabs...

    Sets the number of spaces to one tab stop for the topmost window(default is 4 spaces to one
tab).



Preferences...

    Displays a dialog box to allow changing of default preferences.  Font, size, creator and
spaces per tab can be set.  The radio buttons and check boxes are covered below.



Strip LF

    Selecting the Strip LF option removes the linefeeds when the files are read in.

SmartStrip

    SmartStrip is an intelligent linefeed remover in which linefeeds are removed when the
file is read and replaced (after each CR or replacing each CR - depending on the input
format) when the file is written back.  The default option is SmartStrip.

Don't Strip

    Don't remove any linefeeds on file open.



Auto Indent

    Toggles automatic indentation of text (useful for programmers).  Default is autoindent on.

New Untitled

    If selected, displays an Untitled window when starting Edit II (next time of course).
Default is on.

Print Headers

    If selected will print informative header information at the top of every page.  Default is to
print these headers.

Cursor Jump

    Uses the '-' key on the keypad to invoke the cursor jump feature (see later).  Default is
on.



Save Preferences Button

    Saves the option settings (all the items in the option menu) into the EditPrefs file which is
stored in the Preferences folder of the System Folder.



Windows menu



Layer

    Layers all the windows neatly on the screen.  The previous frontmost window is brought to
the front.



Tile

    Tiles all the windows neatly on the screen.  The previous frontmost window is selected.
This option is active for 9 or less windows.



Close All

Save All

    Closes (or saves) all the displayed windows.  Saving does not close any windows.  Any
untitled windows will be 'saved as'.



<window name list>

    Each of the window names appears here for rapid selection.  The first 9 windows have
command key equivalents 'command-1' through 'command-9'.  Edit II can now handle
unlimited windows (subject to available system memory set aside for it of course).



3.    Keyboard Frolics



Cursor keys on the Macintosh Plus and above now work.  In addition, if you have an extended
keyboard, then the extra keys between the main keys and keypad also work as follows:



page up

    Moves to the previous screenful of text without changing the insertion point.



page down

    Moves to the next screenful of text without changing the insertion point.



home

    Moves the insertion point to the beginning of the file.



end

    Moves the insertion point to the end of the file.



del (delete to right)

    Deletes the character to the right of the insertion point.



enter (on keypad)

    Scrolls to the insertion point.



- (on keypad)

    Jumps around the five insertion points last clicked at.  Note that double-clicking to select
a word counts as two insertion points (a quirk of Capps’) and that Edit II will cycle
through all five points, even though they are the same (like at the beginning).  So if the
insertion point seems stuck, keep on pressing '-'!  Note that this can be turned off in the
Preferences dialog.



F1–F4

    Undo, Cut, Copy and Paste.



option-return

    If autoindent mode is on, then hitting option-return will move the insertion point to the
start of the next line and not to do any autoindenting for that line.



You can also toggle the special cursor pad mode by hitting the num lock key on the numeric
keypad.  The num lock light on the keyboard will go off (indicating that the numeric keypad is
now in cursor mode).  This displays an additional (disabled) menu called CursorPad.  The keys
on the numeric keypad now take on special functionality as given below (like the I*M keypad):





4.    GREP searching and replacement



GREP searching can be now done using regular expressions like the Unix GREP tool. Pattern
matching of regular expressions is carried out as follows:



Patterns (regular expressions)



1.    Any non-special character is a regular expression which matches itself.  Characters [ ] \
and . are special characters and should be preceded by \ (see rule 4).



2.    A regular expression can be concatenated with another regular expression.



3.    The . (period) is a special character which matches any one character.



4.    The \ followed by any character except ( ) < > or one of the digits 1-9 is a regular
expression which matches that character.



5.    A string of characters s surrounded by brackets [ ] forms a regular expression that
exactly matches any one of the characters in s.  The    regular expression [^ß] matches
any character not in the string ß.  If a sequence of 3 characters a-b occurs in the string,
then this represents all the characters from a to b inclusive.



6.    A regular expression R followed by * forms a regular expression which matches zero or
more occurences of R.



7.    A regular expression surrounded by \( and \) matches whatever the regular  expression
matches.



8.    A \ followed by a digit n 1 to 9 is a regular expression which matches whatever the nth
subexpression surrounded by \( \) matches.



9.    A regular expression surrounded by \< and \> constrains the match to occur when the
regular expression is immediately preceded and followed by characters which do not match
[A-Za-z0-9_] and the first and last characters match [A-Za-z0-9_].  This allows us to
look for "words".



10.    A regular expression which starts with ^ anchors the search pattern to the start of a line.
The ^ appearing anywhere else in the regular expression will match the character ^.



11.    A regular expression ending in $ will anchor the search pattern to the end of a line.  The $
appearing anywhere else in the regular expression will match the $.



Replacements



1.    Each occurence of & in the replacement string will be substituted with whatever was last
matched by the regular expression.



2.    Each occurence of the form \n where n is a digit 1 to 9 will substitute whatever was
matched by the nth subexpression enclosed in \( and \).



3.    Each occurence of the form \p where p is not a digit 1 to 9 will substitute that character p.



5.    Workarounds and other hints



Edit II can only search for a pattern in a forward direction.  If you want to search backwards,
the best workaround is to go back to the start of the file (home) and then search.



All files are edited in memory.  So if you have a large file, reset the size of the application using
Get Info on the Edit II application icon and change the size of the application memory. Or better
still - run under the Finder (and not MultiFinder).  Naturally you shouldn't edit a 2MB file on a
1MB Mac using Edit II!  Try as far as possible to have approximately twice the memory assigned
to Edit II than the total size of all the files you're editing.



Holding the option key when Edit II is starting up will bring up the standard file open dialog box
for you to select the name of a file to edit.



Edit II will try to save files when memory runs too low but there is no guarantee that it won't
crash while doing this.  The advice is to frequently check the available space (see the About Edit
II... box to show the current amount of free memory).



Additional creator names can be inserted into the Creator menu by using ResEdit (use at your
own risk!!).  Note that exactly FOUR letters must be keyed in for each creator name.



Holding the control key when quitting from Edit II will forcibly turn off the num lock LED (just
in case you ever need it!).



6.    Bug Reports



If you find any bugs with this program, please write to me at the above address. You can also
send electronic mail to me on GEnie as K.SEAH, on America OnLine as KSeah or via Internet as
[e-mail].



7.    Warranty



Kenneth Seah hereby disclaims all warranties relating to this software, whether express or
implied, including without limitation any implied warranties of merchantability or fitness for a
particular purpose.  Kenneth Seah will not be liable for any special, incidental, consequential,
indirect or similar damages due to loss of data or any other reason, even if Kenneth Seah or an
agent of his has been advised of the possibility of such damages.  In no event shall Kenneth Seah's
liability for any damages ever exceed the price paid for the license to use software, regardless
of the form of the claim.  The person using the software bears all risk as to the quality and
performance of the software.



8.    Questionaire



Copy, print this and fill in the blanks!



REGISTERING FOR: Edit II Version 2.0.2 May 14, 1992



NAME:











ADDRESS:











CITY:





STATE:





ZIP:



ELECTRONIC MAIL ADDRESSES (GEnie, InterNet, Compu$erve, AppleLink, America OnLine):
[For updates and bug reports]









Macintosh you have:









Current version of your System Software:











Comments about Edit II (add more space if desired!):















>>> Don't forget the US$15 shareware fee <<<